Pocket Wizard FlexTT5 Nikon

C$249.00
Article number: PW-10452
Availability: Out of stock
Delivery time: contact us for delivery time

Pocket Wizard FlexTT5 Nikon

The FlexTT5, an auto-sensing transceiver using radio signals can be used on a camera as a transmitter or connected to a flash as a receiver – or both. It can give you TTL communication between your compatible Nikon camera and flashes, as well as trigger other flashes manually. 

With FlexTT5s, you can sync your Nikon speedlights up to 1/8000 using High Speed Sync (HSS), plus adjust power to the remotes from your camera’s position in either manual or TTL, using a master controller like the AC3 ZoneController or a master flash. The FlexTT5s can sync at faster speeds with studio strobes using our patented HyperSync technology and are also compatible with any PocketWizard radio for triggering remote manual flashes or remote cameras.

 

TTL Compatibility: Nikon i-TTL
Frequency: 340.00 – 354.00 MHz US FCC / IC
433.42 – 434.42 MHz CE
Channels: 52 Channels over 26 Frequencies (FCC/IC)
35 Channels over 5 Frequencies (CE)
Antenna: 2.7″ (6.9 cm) rubberized with 180 degree swing
Transmit output power: Less than 0.001 watt (1/1000 of a watt or 1 milliwatt)
Range Performance: Up to 10 to 240 meters (30 to 800 feet) for E-TTL II triggering.  Up to 10 to 365 meters (30 to 1200 feet) for basic triggering. Range is dependent on multiple factors including equipment, mode, environment, positioning, orientation and interference.
Mounting: Hot Shoe, 1/4-20, lanyard, velcro
Maximum Shooting Rate  Frames per second (fps) TTL Mode:  within 1 FPS of camera’s maximum FPS
Basic Trigger Mode: Camera Max FPS
* dependent on flash power settings
FPS = Frames Per Second
Power / Channel Switch OFF – C.2 – C.1
Zone Select Switch A-B-C (matches Nikon zones)
Status Indicator LED: Green, Amber, Red status indications
Camera / P1 Port 1/8″ (3.5 mm) stereo miniphone for 2-stage remote camera triggering.  Port Voltage Handling: up to 50 Volts, 100 milliamp continuous
Tip = Trigger
Ring = Pre-Trigger
Sleeve = Ground
Flash / P2 Port 1/8″ (3.5 mm) mono miniphone.  Port Voltage Handling: up to 200 Volts, 4 amps peak, 250 milliamp continuous, non-polarized
Minimum Receive Contact Time Camera / P1 Port = 80 milliseconds

Flash / P2 Port = 500us

Voltage Present 3.3 VDC (all pins) – safe for all cameras
Hot Shoe voltage protection: Hot Shoe: up to 50V
USB: USB Compliant 2.0, Mini-B Connector, 5VDC regulated, 100mA, Pin 1 Positive, Pin 4 Ground
Operating Temperature Above -15° C (5° F) and below 50° C (120° F).
Storage Temperature (without battery) Above -30 C (-22 F) and below 85 C (185 F)
Construction High impact plastic, captive battery door
Hot Shoe made of glass reinforced resin
Power
2x AA batteries, USB
Battery Life 60 + Hours
Dimensions 3.6″ (9.2 cm) long x 2.9″ (7.3 cm) wide x 1.4″ (3.6 cm) tall, antenna lowered
Weight 5.4 oz (153 grams). 3.8 oz (108 grams) without batteries
Included in the box FlexTT5 Transceiver, USB cable, Two (2) AA batteries, Quick Guide
ROHS Compliant Yes
0 stars based on 0 reviews